How To Fix Crosstalk In VLSI | Best Answer

The maximum amount of crosstalk to design for in single-ended systems should be less than around 5% of the signal swing. In high-speed serial links, a safe maximum crosstalk value to design for is less than -50dB, or 0.3%.

Crosstalk is a phenomena caused by capacitive coupling in which logic sent in a vlsi circuit or a net/wire has an unintended influence on neighbouring circuits or nets/wires.

To remove crosstalk is to exploit the very parallelism that leads to its creation by closely coupling the return path to ground to your high-speed signals.

Crosstalk delay occurs due to aggressor and victim nets switch together

Crosstalk is a phenomena caused by capacitive coupling in which logic sent in a vlsi circuit or a net/wire has an unintended influence on neighbouring circuits or nets/wires.

The term “noise” in electronic design generally means any undesirable deviation in voltage of a net that ought to have a constant voltage, such as a power supply or ground line.
Cross talk is dominant noise effect in deep-submission CMOS circuits

Separate high-frequency signals from the rest of the traces.
Asynchronous signals should be isolated.
Make use of differential signals.
Make use of ground planes.Minimum width between traces